Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.
A wide scope of application is found in everyday life and in the construction industry. mounting saws. The tool is appreciated by specialists for its high performance, accuracy and ease of use. Electric devices combine mobility and the ability to cut under different corners. Mounting saws are equipped with a work table on which clamping device (vise) is installed. In Russian a wide range of products with different prices and characteristics. To choose the most functional reasonable price tool, you should heed the recommendations our experts.
- Selection recommendations
- Rating of the best mounting saws
- BOSCH GCD 12 JL
- DeWALT D28715
- AEG SMT 355
- BOSCH GCO 14-24 J
- ELITECH PM 3040T
- CALIBER PO-2300 / 380A
- Makita LW1401
- Metabo CS 23-355
- VORTEX OP-355/2200
- Zitrek PM-2300
- ELITECH PM 1218
Power. Assembly saws are equipped with electric motors with different power.
- Saws with powerful motors (2.5-3.5 kW) are most often used in professional activity. Maximum performance possess models with a three-phase electric motor. Distinctive a feature of powerful saws are large discs.
- If you plan to use the tool in the country, then it is better choose a mobile device with a power of 1.5-2.5 kW.
The maximum diameter of the disc. From the diameter of the saw blade Depth of cut and tool productivity depends. IN industrial premises you can find snap-in diameters up to 400 mm. For domestic needs, a disc with a diameter of 180 … 305 is selected mm
The size of the landing hole. In assembly saws shafts of different sizes are used. When choosing a blade, it’s important take into account the bore diameter. It must match the size holes on the disk. If the disk has a large seating diameter, the use of adapter sleeves is allowed. Household models have a landing diameter of 22.2-25.4 mm. Industrial the tool is equipped with discs with a hole of 25.4-32 mm.
Safety. During the operation of the saw, many sparks, shavings and abrasive. When sharply feeding a disc at high there is a risk of web tearing, which is a very dangerous to others by accident. Therefore binding safety element is a protective cover. On many modern models are installed sliding casings, which change their position depending on the height of the saw blade.
Additional options. To increase the life of the saw, and also for convenience during work manufacturers equip The tool has a number of additional options.
- The laser marker helps to precisely cut the workpiece.
- Soft start allows you to reduce the load on the power grid, reducing the inrush current. The recoil on the tool is weakened, its service life is extended.
- The presence of electronic motor protection saves the mounting saw from failure during jamming of the blade. This option will protect motor from combustion and in a number of emergency situations.
- Spindle lock is used to fix the shaft with the aim blade replacement.
The editors, together with the service Rankquality.com, were selected for review 11 best mounting saws. All these models are implemented in the trading network. Of Russia. When allocating seats, the editorial board relied on the opinion expert community and reviews of Russian consumers.
Rating of the best mounting saws
|Nomination||a place||Name of product||price|
|Rating of the best mounting saws||1||BOSCH GCD 12 JL||RUB 26,090|
|2||DeWALT D28715||22 250 rub.|
|3||AEG SMT 355||12 590 rub.|
|4||BOSCH GCO 14-24 J||11 525 rub.|
|5||ELITECH PM 3040T||11 911 rub.|
|6||CALIBER PO-2300 / 380A||18,265 rub.|
|7||Makita LW1401||10 764 rub.|
|8||Metabo CS 23-355||9 601 rub.|
|9||VORTEX OP-355/2200||7 540 rub.|
|10||Zitrek PM-2300||6 588 rub.|
|11||ELITECH PM 1218||3 932 rub.|
BOSCH GCD 12 JL
The professional BOSCH GCD 12 JL assembly saw has a number the benefits that helped her win our review. Powerful (2 kW) low-speed (1500 rpm) engine allows with easy to cut thick-walled workpieces. For precision cut meets laser guidance system. For operator safety the manufacturer has installed a sliding casing, which smoothly descends to base. When using a disk with a diameter of 305 mm, the cut depth reaches 85 mm with a width of 158 mm. Landing size snap should be 25 mm. The developers have provided the ability to turn cutting parts at 45 degrees. Experts praised the quality assembly and the presence of a soft start.
Professional installers praise workers BOSCH GCD 12 JL saw qualities. The downside of the model is high price.
- high performance;
- swivel mechanism;
- laser marker;
- smooth start.
- high price.
Silver of our rating receives American development DeWALT D28715 Experts liked the value for money, build quality and performance. The model is equipped with powerful (2.2 kW) high-speed (4000 rpm) motor, for switching on which set soft start. It is possible to equip a saw with a disk with a diameter up to 355 mm (landing size 25 mm). The depth of cut is 130 mm and a width of 200 mm. The manufacturer has provided electronic motor protection, spindle lock for quick tool changes. Thanks to the rotary structure, it is possible to cut the workpieces under angle of 45 degrees. Light weight should be included in the asset of the model. (18.5 kg).
Domestic users are satisfied with the power, build quality, convenience in work. By cons, they include noisy work and short cable.
- high power
- high-quality assembly;
- the ability to mount to the table;
- convenience in work.
- noisy work.
AEG SMT 355
It is very convenient to work with the AEG SMT 355 installation saw. Experts in appreciated quick clamping workpieces, convenient swivel mechanism (up to 45 degrees). Powerful engine (2.3 kW) allows apply large discs (up to 355 mm). Depth and width of cut limited to 125 mm. Therefore, the best option for specialists consider the use of saws for working with pipes and profiles. Durability and steady differs a sawing table. Rubber feet not allow the tool to glide during operation.
In reviews, positive ratings from users prevail. They praise the model for power and ease of use, precision cut and long power cord. But the lack of smooth running and poor native the disc did not allow the German saw to take a higher place.
- high performance;
- exact cut;
- quick angle adjustment;
- long power cord.
- no soft start;
- badly sawing the native disk.
BOSCH GCO 14-24 J
The most difficult tasks German can handle BOSCH GCO 14-24 J. tool. It looks more powerful (2.4 kW) of its fellow winner. The manufacturer installed a new one in design clutch, due to which the disk wears out more slowly (about 20%). Experts praised the model for resistance to overload, the availability of options smooth start-up and affordable price. The working part rotates on angle up to 45 degrees. Installation saw demonstrates a deep cut (up to 196 mm) when using a disk with a diameter of 355 mm. But boarding snap size should be 25.4 mm. Replacing a drive quickly helps spindle lock.
The instrument gives way to the leader of the review exactly cut, he does not have laser marker. While the saw is not in high demand.
- high power
- Slow disc wear
- deep cut;
- smooth start.
- few users;
- no laser marker.
ELITECH PM 3040T
A wide range of applications is found in the Russian-Chinese assembly saw ELITECH PM 3040T. It is suitable for both professional and and domestic use. The tool copes with cutting black rolled. The manufacturer installed a three-phase motor 3 kW, which allows you to work with large disks diameter up to 400 mm (landing size 32 mm). In terms of mobility the model is inferior to the leaders of the review, because the weight of the instrument reaches 49 kg Experts did not like the hard drive belts, which most users change immediately.
I earned praises from Russian installers for asynchronous engine, affordable price, high power. Disadvantages they consider hard belts and connect only to the power network 380 IN.
- high power
- long cable (3 m);
- affordable price;
- large saw blade.
- hard belts;
- a lot of weight.
CALIBER PO-2300 / 380A
Another Russian-Chinese saw with an operating voltage of 380 V hit the TOP 6 of our review. Model CALIBER PO-2300 / 380A designed for sawing metal blanks of various shapes and thickness. As a cutting tool, a disc with a diameter of 400 mm (landing size 25.4 mm). The manufacturer has provided the ability to rotate the saw blade up to 45 degrees. To prevent engine damage, the developers proposed a belt torque transmission. Since the weight of the tool is enough large (52 kg), 4 wheels are installed on the bed. Thanks to the long the handle cut depth is adjusted smoothly and precisely.
The most common saw problem, according to users, is a quick failure of the start button. Because of her reflow fuse trips.
- high power
- large drive;
- long handle.
- heavy weight;
- the button burns.
Various building materials Makita LW1401. The experts liked the comfortable work that provides a D-shaped handle. The cutting table has a reliable clamping device, it is characterized by high strength and sustainability. Powerful motor (2.2 kW) allows you to work with the disk diameter 355 mm. However, the cut depth is only 70 mm. The disc must be selected with a 25.4 mm mounting hole. For quick change tool manufacturer has provided a lock spindle. The weight of the tool is 16.6 kg.
Domestic users appreciated the speed and ease of cutting. However, thick-walled pipes (80×80 mm thickness 7 mm) to saw is very difficult. The downside of the model is the lack of soft start.
- convenience in work;
- good power;
- spindle lock;
- exact cut.
- no soft start;
- it is difficult to cut thick-walled pipes.
Metabo CS 23-355
Experts attribute a mounting saw to a professional tool Metabo CS 23-355. It is driven by an electric motor 2.3 kW, which reaches speeds of up to 4100 rpm. Specialists liked the safety and low weight (16.9 kg), ease of use and good performance. For cooling Motor developers installed ventilation. Secure fit blanks provide a quick clamping vise. Foreseen the ability to rotate the cutting part at an angle of up to 45 degrees. Role snap can play discs with a maximum diameter of 355 mm and landing size 25.4 mm.
Users are satisfied with power, safety, ergonomics saws. Not enough owners of such modern options as a laser and smooth start. The native disk is not suitable for work.
- good performance;
- motor ventilation.
- no number of options;
- bad drive included.
The Russian development VORTEX OP-355/2200 has several attractive moments. Mounting saw sold at an affordable price price, it has good power (2.2 kW) and performance. Experts praised the model for its compactness, sustainability and safety. The asset should be added to the asset. light weight (13.6 kg), convenient location of the start button, ergonomic handle. The model is ideal for solving a number of household tasks.
Many domestic users from the saw were twofold impressions. On the one hand, a reliable electric motor pleasantly surprised me and durable gearbox. The vise and protective cover look decent (albeit no sliding section). But on the other hand, the manufacturer saved on the bed, options, and enough minor flaws.
- powerful reliable motor;
- durable gearbox;
- good vice;
- flimsy bed;
- no soft start.
Quickly and accurately cut metal workpieces at home conditions help budget saw Zitrek PM-2300. This model Affordable, it is equipped with a powerful electric motor (2.3 kW). Thanks to a well-thought-out design, the tool carries quite deep (125 mm) and wide (160 mm) cuts. The experts praised the smooth cut, which not all eminent models. Experts advise immediately replacing the native disk with more high-quality equipment. The disadvantages of the product include lack of soft start and a short power cord.
All owners of the Czech saw, without saying a word, write that the device cuts like clockwork. At the same time, the cut quality is at a high level. The users are also united in the fact that the manufacturer should establish a soft start and lengthen the wire.
- quick cut;
- flat cut;
- good power;
- high-quality assembly.
- bad drive included;
- no soft start.
ELITECH PM 1218
If you want to cut metal pipes with a diameter of up to 50 mm, then you can opt for the inexpensive ELITECH PM mounting saw 1218. Experts were surprised by the lightness (5.5 kg) and compactness of the model. The tool is equipped with a disc with a diameter of 180 mm (landing size 22.2 mm), the device has an inclined cutting part (45 degrees). Small by power (1.2 kW) the electric motor copes with the delivered tasks due to very high speed (5000 rpm). In asset saw a long power cord (3 m) should be inserted and easy to operation.
For several reasons, the product was on the last line of our review. First of all, users complain about a weak frame and backlash in the design. The motor starts very sharply, therefore begs the option of a smooth start. But for that price, many defects are forgiven.
- low price;
- long wire.
- no soft start;
- weak bed.
Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.