11 best cellular signal amplifiers and internet

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Networks of mobile operators are constantly expanding their areas coverage, more and more new base stations with towers are launched. However, there are still many places where the signal strength insufficient for a normal and stable internet, and in some places even simple voice communication goes with big interruptions. For solutions There are special devices for this problem – signal amplifiers cellular and internet. Team presents you special rating with reviews of the best, according to our experts, devices and kits to ensure stable and high-quality mobile communications where in pure form the signal is too weak and unstable.

How to choose a cellular and Internet signal booster

To begin with, we’ll figure out in what situations and in general circumstances you may need a signal amplifier with which tasks in general can be handled by devices such as “underwater stones “can be in installation and operation, well, and most importantly – what should be guided when choosing a cellular signal amplifier communication and internet.

So, the main task of the amplifier is to ensure confidence signal in those places where with its stability and power can be outages. In cities, the cause of an unstable signal may be overloads at repeater stations, dead zones in the country due to the features of the terrain and by definition less density of operator towers, worse coverage, different arrangement priorities (in favor of voice, to the detriment of the Internet, for example) and other things.

As of 2019, mobile operators who They work in the Russian market using six frequency ranges: 450, 800, 900, 1800, 2100 and 2600 MHz. Within these numbers all current generation-standards are covered cellular communications – 2G, 3G, UMTS, 4G, LTE and all their possible variations. So, 2G provides only voice communication and uses frequencies 900 and 1800 MHz; 3G is already two-in-one – both voice and internet on frequencies of 900 and 2100 MHz; 4G in the basic version is designed only for high speed internet transmission at frequencies of 800, 1800 and 2600 MHz However, today in Russia the situation is different – LTE operates at a frequency of 900 MHz, and most of the operators are already got permission to use the frequency of 2100 MHz. First 2019, in addition to the basic LTE, the VoLTE service was added – voice data transmission through 4G packet network inclusive (switching between 4G and 2G / 3G occurs on the fly, unnoticed by user).

Knowing all these points is important when choosing the most suitable. a model or kit for amplifying a cellular signal and / or Internet. When buying a cellular and internet signal booster, you should clearly understand what exactly you are going to strengthen – voice, 4G broadband, or something else. IN our rating will feature different sets, each of which copes with some task better, but with some worse.

Outside large cities, in low-density locations Mostly, the frequency used is 900 MHz – the most “long-range”. In big cities they use mostly parts of GSM1800, 3G, as well as LTE

When it comes to amplifying cellular and Internet signals in large warehouse and office premises within the city, experts recommend using repeaters at a frequency of 2100 and 1800 MHz. Why exactly them is a separate issue, but such The recommendation is well founded. In general, the general rule – the smartphone will always try to connect the highest of those frequencies that are available to him in the current location. Therefore, for choosing an amplifier, you should focus on the upper workers frequency. If the task is to cover the entire range of possibilities a mobile operator in a particular area or room, for of this there are multi-band combined devices.

One of the key features of a hardware kit to amplify the signal of cellular and internet is the output power – it determines the area that the repeater is able to cover already amplified signal. So, for example, an amplifier with an output 100mW capable of providing stable and high-quality signal 200-300 square meters. meters square. At power 250-300mW local coverage area will already be 500-1000 sq. meters – the best option for country houses with large plots. It is wise to buy an amplifier with a small margin for power, but without “excesses”. Powerful Amplifier under certain conditions, on its own can cause interference to base station of a cellular operator. Such an object will be instantly “calculated” by the relevant services, the owner is fined, and equipment in the worst case will be seized, but in the best just will be banned for future use.

Another visual and indicative characteristic of the amplifier is gain. It is measured in decibels (dB), and shows how much the output signal will grow in relation to the entrance.

And one more important point. Signal amplifier amplifies this same signal to the documentary value only in ideal conditions and subject to the use of only one channel. In practice but interference, noise, interference and talk are inevitable at the same time multiple subscribers within the local coverage area. This one factor to one degree or another will reduce the effect of signal amplification cellular and Internet for each individual user.

Finally, the equipment. Signal amplifiers are most often sold in in the form of whole sets. Each such kit ideally includes itself repeater, connecting cables, various accessories and two antennas – large external (receiving) and compact internal (transmitting). But a variety of variations of this configuration are possible, depending from a specific model.

Rating of the best cellular signal amplifiers and internet

Nomination a place Name of product price
Best Single and Dual Band Cellular Signal Amplifiers and internet 1 Everstream ES1800P 9 400 rub.
2 VEGATEL VT-1800 / 3G 12 900
3 PicoCell 1800 SXL 33 400 rub. rub.
4 KROKS RK900 / 2100-50 7 900 rub.
5 Titan-2100 9 100 rub.
The best multi-band amplifiers for cellular signal and internet 1 Gave Communication DS-5band-23 94 300 rub.
2 PicoCell 5SX23 94 000 rub.
3 VEGATEL AV2-5B 88 800 rub.
The best kits 1 iTONE GSM-10B 6 900 rub.
2 TITAN-900 7 250 rub.
3 VEGATEL VT-900E-KIT (LED) 12 900 rub.

Best Single and Dual Band Cellular Signal Amplifiers and internet

In the first rating nomination we will consider quite highly specialized amplifiers that work only one at a time or two specific frequencies or standards. Here we look two examples of such devices, each of which is available in many options for each frequency, but individually serviced can only one or two within two communication standards.

Everstream ES1800P

Rating: 4.9

Everstream ES1800P

Everstream brand repeater opens the nomination domestic brand owned by Sigma Service. The manufacturer has been operating in the telecommunications market since 2007, and with since then from a small installation firm grew into a major integrator in areas of cellular communications.

This particular amplifier operates within frequencies and GSM1800 / LTE1800 standards. However, this is only a representative of the whole series, and for each frequency the company produces a separate device exactly the same form factor and configuration. The only difference is operating frequency and, accordingly, in the nomenclature. ES1800P we take as a good example.

So, this model is a repeater with a working 1800 MHz, capable of operating at this frequency in GSM networks and LTE. The power of the outgoing signal is 100mW, which allows provide coverage of up to 300 square meters. meters square.

The operating frequency band is within 75 MHz. In this case this means that in the direction of the station-telephone data exchange goes in the frequency range 1805-1880 MHz, and in the opposite direction – in interval 1710-1785MHz.

Repeater gain of 65dB for direction telephone station and 60dB for the reverse. In this case, the outgoing the power regulated by internal automation is 19 and 20dBm respectively. Permissible gain unevenness in the working bandwidth is +/- 3dB.

Dimensions of the device are 230x130x34mm, weight – 1.2kg. For he needs power supply 12V, 2A. In operation consumes no more than 10W electric power.

This series is recommended for equipping offices in the basement premises, country houses, in specific cases – for change houses at remote construction sites. The device is equipped with enough informative LCD display, guidance scale to the base station, attenuators (devices for reducing EM oscillations). Outgoing power can be adjusted manually.

Advantages

  • reliability and continuity;
  • the ability to manually adjust the outgoing power;
  • stable outgoing signal;
  • availability in installation and operation;
  • LCD screen.

disadvantages

  • No significant deficiencies were noted.

VEGATEL VT-1800 / 3G

Rating: 4.8

VEGATEL VT-1800 / 3G

The second nominee of this selection of our rating is the product domestic plant “Moscow Microwaves” – dual-band signal amplifier for cellular and Internet VEGATEL VT-1800 / 3G.

This is a basic level household repeater designed for amplification and stabilization of the cellular signal and the Internet of generations 2G, 3G and 4G on two operating ranges – 1800 and 2100 MHz. Such frequency coverage allows you to solve most of the problems with voice communication and the Internet that arise in the city.

To be precise, the device works in three directions – GSM-1800, LTE-1800 and UMTS-2100. The latter is fundamental to 3G networks in the Russian Federation. UMTS-2100 provides both voice telephony and the Internet. GSM-1800 is used by operators there, where the “long-range” frequency of 900 MHz is not available or is overloaded. it the same will apply to new operators, for example, the Tele2 provider, entered the domestic market rather late, uses for Providing 2G communication exclusively at 1800 MHz. What about LTE-1800, then this standard is often used by Russian mobile operators to provide 4G communications. Main and most the used frequency for LTE is still 2600 MHz, but LTE-1800 is quite common in certain cities and even the regions of Russia.

The gain in this model is 65 and 60dB in station-telephone and telephone-station directions respectively. Both automatic and manual adjustments are available. gain. Built-in protection against failure due to overload. For manual adjustment, a mechanical front panel switch – manual adjustment allowed up to 15 dB in 5 dB steps. Incoming and outgoing signals are configurable independently of each other.

In conclusion, a few words about physical characteristics devices. Dimensions of the repeater – 205x175x45mm, weight – 0.84kg. Made in a durable metal case in natural silver shade. Special holes on the housing allow you to fix repeater on the wall. In operation, it consumes 20W of electrical power. The level of protection against external factors corresponds to IP40

Depending on the point of sale, you can buy as a repeater itself separately, and a whole set with outdoor and indoor antennas, cable and optional accessories. Individual distributors allow you to pick a complete set at the discretion of the buyer.

Advantages

  • reliability and continuity;
  • simplicity of installation and operation;
  • automatic and manual gain control;
  • protection against external adverse factors;
  • metal case.

disadvantages

  • not the most outstanding power gain.

PicoCell 1800 SXL

Rating: 4.7

PicoCell 1800 SXL

The third repeater in the rating of the best signal amplifiers According to the version of mobile communications and the Internet, another example of high-quality products of the Moscow Microwaves plant, only another brand name – PicoCell. This is the most powerful amplifier in this group.

This device is significantly more massive than previous options – dimensions 240x165x80mm and weighing 1.7kg. Enclosed in a metal case without special design delights. On the front panel is located black and white LCD screen.

Main technical characteristics: power – 320mW; gain – 80dB for incoming signal and 75dB for outgoing; operating frequency – 1800 MHz; cellular standards – 2G DCS1800 / 4G LTE1800; auto gain control; power consumption – up to 30W; protection against external factors – IP40; incoming impedance – 50 Ohm; noise figure at maximum gain – not more than 6dB;

With this configuration, the amplifier is able to provide coverage, whose area is in the thousands or even tens of thousands square meters. Ultimately, the real coverage will be depend on a number of factors. This is the nature of the incoming signal. (how much can it be fully strengthened in general), quality and antenna characteristics, cable footage (the longer, the more losses), the specifics of rooms and materials of walls / partitions. Equally important is the location. So, in the city the radius of the coverage area can be minimal – from 200 meters; at that the same time, in the open spaces outside the city, the repeater may well broadcast the amplified signal for 1 or even 2 kilometers.

One of the key benefits of this cellular amplifier and Internet experts call the availability of effectively integrated protect the network of operators from interference caused by the amplifier itself. Being extremely powerful, the repeater does not interfere with nearby base stations of mobile operators. Also a big plus is automatic power adjustment – repeater changes power when changing the incoming signal.

This model is recommended for widespread use – in office premises, country houses, small shopping centers, etc. The manufacturer provides an official 12 months warranty.

Advantages

  • record power;
  • reliability and continuity;
  • automatic power adjustment;
  • effective protection against outgoing interference that may affect the work of base stations of mobile operators.

disadvantages

  • some users do not like clumsy design (dubious disadvantage).

KROKS RK900 / 2100-50

Rating: 4.6

KROKS RK900 / 2100-50

The fourth position in this rating nomination is a kind of the opposite of the previous super-powerful model. it modest power duplex repeater gain and coverage, but it is incomparably cheaper, and designed for other purposes. Produces amplifiers KROKS of the same name Russian research and production company.

The dimensions of the device are 160x150x37mm. Body metal with high-quality and thin high-quality assembly and black protective coating. Used to enhance cellular signal in the standards and frequencies of GSM900 and UMTS2100.

Main technical characteristics: gain – 50dB; maximum outgoing power – 7dBm; coverage area – about 100 square meters meters; working power consumption – 4W.

The amplifier is equipped with an LED display that displays current mode and conditions, as well as the presence of overload or loops. The gain control in this model is not provided for.

This repeater and devices of the same class are designed for signal coverage of small-sized apartments, small office premises. This model also shows itself well for providing stable communication in a moving car.

Advantages

  • high-quality and stable outgoing signal;
  • low noise level;
  • LED indication of states and modes;
  • ease of installation, configuration and operation;
  • “industrial”, but nice appearance;
  • affordable price.

disadvantages

  • Does not always provide claimed coverage.

Titan-2100

Rating: 4.5

Titan-2100

And at the end of this rating nomination, we will consider another a popular amp model that can solve all problems with voice communication and 3G Internet in those places where outages with stability and direct cellular signal strength the operator. Some limited opportunities offset reasonably affordable price. The same factory produces this model. “Moscow microwaves”.

This amplifier works within the UMTS2100 3G standard on corresponding frequency. In the model range of the manufacturer there are similar devices adapted to other standards and frequency. Our experts included this model in the review as representative to demonstrate the capabilities of the entire series.

The dimensions of the device are 170x100x30mm, the weight of the kit is 0.48g. Packaging dimensions – 230x155x70mm. Metal case with black protective coating does not differ any noticeable design, but with the naked eye you can see the high build quality and attention to detail. Protection against external factors corresponds to IP40. Natural, passive cooling. Energy consumption – no more 5W

Key Specifications: Marginal Ratio amplification – 65 and 60dB in the directions of the station-telephone and telephone station, respectively; operating frequency band – 2110-2170 MHz and 1920-1980 MHz in the same directions; marginal outgoing power – 20 and 15dBm, respectively; defence from overload; protection against self-excitation mode; coverage area in premises – up to 350 square meters. meters; noise figure – no more than 6dB; impedance – 50 Ohm.

The amplifier is equipped with an automatic gain control system, which itself adapts to current conditions. On the case devices there are a number of indicators, one of them the most important – “Shielding between antennas.” He reports too close the location of the internal and all-weather antennas to each other. For prevent interference with a cellular operator’s base station or own overload, threatening failure, in the amplifier automatic shutdown is provided.

Advantages

  • stable signal;
  • high protection against internal and external factors;
  • auto shutdown in case of overload threat;
  • record low weight;
  • affordable price;
  • concise but pleasant appearance.

disadvantages

  • not marked.

The best multi-band amplifiers for cellular signal and internet

Second nomination in the ranking of the best cellular signal amplifiers communication according to the version represents the most popular category devices that are able to efficiently process the signal immediately in multiple frequency ranges, being compatible with multiple cellular voice and digital data standards. This multifunctionality is expected in the most serious way. affects the cost of the amplifier, so the feasibility of such purchases must be carefully considered.

Gave Communication DS-5band-23

Rating: 4.9

DalSvyaz DS-5band-23

And the first number in this nomination we will consider the five-band medium power cellular signal booster domestic company DalSvyaz.

Externally, the amplifier is a fairly massive candy bar dimensions 440 × 268 × 58mm, which, in contrast to the above models, even different original design. Device weighs unpacked 9 kg. The degree of protection of the case from external factors – IP40. Designed for installation and operation indoors. In work consumes 60W of electricity.

Key Specifications: Standards Supported communications and chatrooms – GSM900 / 1800 / 3G UMTS900 / 4G LTE800 / 1800/2600; gain – 70 and 75dB for reception and transmission respectively; output maximum power – 20 / 100dB / mW and 23 / 200dB / mW for reception and transmission, respectively; unevenness Frequency response – no more than 8 dB; impedance – 50 Ohm; noise figure – no more 6; gain adjustment in the range of 31 dB in steps 1dB

This amplifier is recommended to ensure stable and comfortable communication within the specified standards and frequencies regardless of the mobile operator in large urban apartments, country houses, as well as in office and public buildings. IN depending on operating conditions, the repeater allows you to set up six internal antennas, thus creating a flexible coverage area area of ​​up to 600 square meters. meters.

The device is easy to install and operate. The repeater is equipped display with a simple and intuitive menu of functions and modes. Easy integrates into more complex multi-level telecommunications system.

For a local uninterruptible communication device in addition to the Repeaters will also be needed: a large external antenna; least one (maximum six) internal antenna; signal divider; by Necessity – a linear power amplifier of a cellular signal; coaxial cable with a resistance of not more than 50 Ohms; high frequency connectors according to the cable brand; means for lightning protection; network filter for power adapter.

Advantages

  • sufficient power for a wide range of tasks;
  • reliability and continuity;
  • informative board;
  • relative ease of installation and operation;
  • good service;
  • good design.

disadvantages

  • heavy.

PicoCell 5SX23

Rating: 4.8

PicoCell 5SX23

Now in our ranking we will consider a little more advanced mobile phone and internet signal booster PicoCell. This device is able to provide stable communication on much larger area than the previous option, while being in three times lighter. Supports all frequencies and all standards that use Russian mobile operators. Technological perfection, however, in this case is balanced by a very tangible at the price.

So, the PicoCell 5SX23 is a five-band midrange amplifier level used as a standalone device for local coverage of the territory with an amplified signal, and as componentry for larger and more branched systems Cellular Relay. The dimensions of the repeater are 220 × 280 × 55mm, weight – 3.5kg. Protection of the case from external factors Complies with IP40. In operation consumes no more than 25W of power electricity.

Main technical characteristics and indicators: coefficient amplification – 75dB; outgoing power – 23/200 dB / mW; adjustment automatic gain within 31dB in 1dB increments; noise figure – no more than 5dB.

The power and gain in this model is enough to provide (subject to an acceptable incoming signal to a large external antenna) stable cellular communication up to 1500 sq. meters area. Such coverage already requires a protection device the base stations themselves of mobile operators published by the repeater interference. And such protection is available in this model.

Advantages

  • high-quality and stable signal;
  • protection of base stations of cellular operators from interference;
  • concise, but not bad appearance;
  • LCD screen
  • light enough.

disadvantages

  • high price.

VEGATEL AV2-5B

Rating: 4.7

VEGATEL AV2-5B

Continues the rating of the best cellular and Internet amplifiers according to the version, another bright brainchild of the Moscow Microwaves plant is transport multi-range repeater of the VEGATEL trademark. it highly effective and very interesting with technological and functional point of view device. Works within standards and frequencies 2G (GSM-900/1800, EGSM), 3G (UMTS900 / 2100), 4G (LTE800 / 1800/2600).

The repeater is a solid candy bar in a sturdy case with good design for this class of devices. Dimensions – 520x250x55mm, weight – 6.2kg. Package dimensions – 570x300x100mm. Weight set (repeater, power supply, documentation, packaging) – 6.8kg. Protection against external factors corresponds to IP55 (allows use outdoors without additional protection). Cooling natural, passive.

Main technical characteristics and indicators: maximum gain – 70dB; outgoing power – 20/100 dB / mW telephone station and 27/500 dB / mW telephone station; auto adjustment amplification – up to 43dB station-telephone and up to 60dB telephone-station; noise figure – no more than 6dB; impedance – 50 Ohm.

The main specialization of this amplifier is for use on trucks, buses, and various types of water transport. But only by transport the scope of the repeater is not limited – it can also be used to provide stable cellular communications and the Internet of country houses or objects within the city. The device has no limit on the number simultaneously used to communicate devices.

This model is equipped with automatic tuning and adjustment gain level. So, for example, if the vehicle Drives in close proximity to a cellular base station operator, the device reduces power to prevent creating interference station. On the contrary, when the vehicle moves away from the station, power rises smoothly. This ensures a seamless communication, and the subscriber does not notice the switching of receiving devices (smartphone, modem, etc.) between base stations. Range action is greatly increased in the case of operation of the amplifier on water transport – the range can reach 35 kilometers.

The manufacturer provides two weeks for testing, verification communication and amplifier performance. Production Warranty – 12 months.

Advantages

  • stable and smooth operation;
  • no limit on the number of people talking at the same time subscribers;
  • smart automatic power and ratio adjustment gain;
  • universality;
  • multi-kilometer range of action on water;
  • design.

disadvantages

  • not marked.

The best kits

The third and final rating category of the best amplifiers cellular and internet signal represents whole ready solutions for the device local area coverage of the amplified signal. Each such solution is a complete set. equipment and accessories necessary for the device of such a point amplified signal. Options may be different and include antennas, cables, connectors, auxiliary modules, mounting elements and stuff. In any case, each such set is sufficient for a functioning signal amplification system cellular and Internet, which, in turn, no one forbids to expand or scale.

iTONE GSM-10B

Rating: 4.9

iTONE GSM-10B

The first number in the nomination will consider an interesting and very Elegant solution of the iTONE trademark. This is a repeater kit low power and auxiliary equipment. Designed for home use in small areas – room, apartment, Cottage, a small office.

The kit consists of the following items: repeater (main unit), outdoor all-weather antenna, indoor indoor antenna, high-frequency cable, power supply, holder, bracket for wall mount, documentation.

The dimensions of the main repeater unit are 10x40x120 mm, weight – 0.15kg As you can see, this is the most compact signal amplification device cellular and Internet from all described. Externally amplifier represents a compact monoblock in the metal case. The front is stylized to look like modern smartphones with a classic design – a stylish black surface, metal edging of the case.

The main technical characteristics of the repeater: frequency ranges telephone station and station – telephone – 880-915 MHz and 925-960 MHz respectively; ultimate gain of 40 and 50dB respectively; outgoing power – 10dBm; noise figure – not more than 6dB; impedance – 50 Ohm; signal coverage area – up to 150 sq. meters; unlimited number at a time talking subscribers; manual power adjustment.

External weatherproof antenna dimensions – 220×20 mm; internal – 110 x 20 x 10 mm.

The whole system can be assembled without difficulty independently, without possessing special knowledge. A brief instruction will be enough, which included in delivery.

The manufacturer provides a 12 month warranty on this model.

Advantages

  • minimum dimensions and weight;
  • simple installation;
  • fully complies with the declared characteristics;
  • value for money;
  • the ability to manually adjust the power;
  • affordable price;
  • design.

disadvantages

  • no auto gain control.

TITAN-900

Rating: 4.8

TITAN-900

The second number in this category is a set of trademarks, which already appeared in our ranking – TITAN. Basis A kit is a repeater that functions within standards and operating frequencies of the second generation GSM-900 and third UMTS900 generation. In the manufacturer’s product line there are the same kits based on similar amplifiers only working in other ranges and standards. Our experts have chosen this option. for example.

The kit consists of the following components: repeater, two antennas – external and internal models ANT-700 / 2700-8Y / PI, two integrated cable assembly 5D / FB Nmale and SMAmale. SMA adapter (female) to N (male), power supply, mounting kit, documentation.

Key characteristics of the repeater: dimensions with connectors – 170x100x30mm; weight – 0.48 kg; power consumption – 5 W; defence from external factors corresponds to IP40; maximum ratio amplification – 65 and 60dB in the direction from the station to the phone and back respectively; ultimate outgoing power – 20dBm (100mW); overload protection; protection against self-excitation mode; impedance – 50ohm; noise figure – no more than 6dB; reinforced coverage indoor signal – up to 500 square meters. meters.

External antenna: weight – 0.9kg; dimensions – 290x210x55mm; built-in cable assembly 10m; gain factor – 8dB; wave channel; vertical polarization.

Internal antenna: gain – 7-9 B; panel type; input resistance – 50 Ohm; maximum input power – 100W; integrated cable 2m in the assembly; dimensions – 160x170x50mm; weight – 0.37kg; supported communication standards – 2G, 3G, 4G, Wi-fi

The maximum gain of the whole set, taking into account Antenna capabilities – 78dB.

A number of indicators are displayed on the repeater housing, one of which is “Shielding between antennas” – reports that the external and internal antennas are too close to each other. Is available automatic gain control responsive to the current network and signal status.

The manufacturer provides a 12 month warranty on this set.

Advantages

  • reliable and stable operation;
  • relatively large coverage area;
  • powerful antenna amplifiers;
  • quality materials and assembly;
  • auto power adjustment;
  • fair price;
  • nice design.

disadvantages

  • significant flaws not noticed.

VEGATEL VT-900E-KIT (LED)

Rating: 4.7

VEGATEL VT-900E-KIT (LED)

Completes the nomination of the rating of the best sets for amplification signal of cellular communication and the Internet is one of the most successful technological solutions in the modern Russian market in this sphere. The VEGATEL trademark has already appeared in our review, and Now we are returning to her again.

The kit includes the following components: VEGATEL VT-900E repeater (LED); external all-weather antenna VEGATEL ANT-900-12YF-KIT; Indoor indoor antenna VEGATEL ANT-900/2500-WI-KIT; 10 meters 5D / FB cable with SMA connector – male; power supply 5V / 2A; fixing set; documentation.

The main technical characteristics of the repeater: extreme gain – 60dB in both directions; marginal outgoing power – 13 and 10dBm in the directions Station-Phone and Telephone Station respectively; indoor coverage – up to 350 sq. meters; noise figure – no more than 6dB; impedance – 50 Ohm; dimensions – 155x106x30mm; weight – 0.5kg; power consumption – 2W; protection against external factors corresponds to IP40; cooling natural, passive; auto power off during overload; automatic power adjustment.

On the case of the repeater is a set of indicators that inform the user about important device conditions, such as – antenna shielding, overload, the presence of a signal at the input and output, and etc. Equipped with both automatic and manual adjustment gain.

External Weatherproof Antenna Features: Gain – 12dB; Supports EGSM / GSM-900 (2G) and UMTS900 (3G) standards; wave channel; vertical polarization; input resistance – 50ohm; dimensions – 870x185x55mm; weight – 0.86 kg; suitable diameter masts – 30-70cm.

Indoor Indoor Antenna Features: Coefficient amplification – 2dB; pin type; maximum input power – 50dB; dimensions – 220x20x20mm; weight – 0.04 kg.

The maximum gain of the kit is 72dB.

The kit is certified by the Ministry of Communications of the Russian Federation. On this set The manufacturer provides a 24 month warranty.

Advantages

  • high-quality and stable work;
  • powerful external antenna;
  • sufficient coverage for domestic tasks;
  • manual and automatic gain control;
  • informative indicators;
  • protective auto shutdown during overload;
  • certification of the Ministry of Communications;
  • 2 year warranty.

disadvantages

  • no obvious minuses were found.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment