10 best ways to clear plaque in the bathroom

Cleaning the bathroom from limescale, rust and dark traces – business is necessary and not always simple. Some store tools so aggressive that they corrode enamel, and some, on the contrary, with cope with the task. Our experts found 10 ways which efficiently and gently remove dirt in the bathroom. We are with share them with pleasure, as well as tips to avoid occurrence of persistent plaque.

Tips for preserving the whiteness of the bath

girl cleans the bathroom

Completely avoid the formation of limescale and dark Traces on the walls and bottom of the bath are quite difficult. Main reason for their occurrence – evaporation of water with the remains of shampoo, body gel, soap, etc. They contain substances that are not washed off. completely accumulating over time on the coating of the bath.

Much also depends on the quality of the water itself – the harder the water, the more it leaves calcareous traces. After rusty water a yellow-brown coating appears.

Nevertheless, if you take advantage of our tips, you can keep the bath clean and shiny longer and use less often special detergents.

  1. After each use of the bath, treat its walls with a damp soaped with a cloth and rinse with warm water.

  2. Dry the bath after washing or washing.

  3. To prevent rusty deposits, make sure that the cranes did not leak.

  4. Do not use metal sponges or emery cloth for cleaning. paper, powders with hard granules. Try to avoid scratches – the more microcracks on the enamel, the faster it will get dirty and harder to clean with detergents.

  5. Be sure to put a rubber mat on the bottom for protection surface from scratches if the bath is used to wash bowls or other metal products, as well as for bathing animals.

  6. If you wash with soap and wipe the bath laziness every time, we recommend apply window washing liquid to its surface from a spray or special glass preservation agents: Titanium, Tilex, Amway. They break down particles of limescale and fat, preventing the appearance of dark traces. The disadvantage of such funds is the constant smell of chemistry in the room and the extra waste of money. This tip useful only to those families in which they use a shower and do not take a bath.

How to remove plaque

If preventive measures to prevent limescale are not carried out, the bath must be cleaned as it becomes dirty. At regular use, we recommend that you do this at least once in Week.

It’s easiest to use specialized cleaning products, the choice of which is huge in household chemical stores. They are effective remove any kind of dirt from enamel and do not require time for cooking (as folk remedies). Important only carefully read the instructions for use and make sure that this Suitable for cleaning the surface type of your bath.

The stronger the enamel, the easier it is to remove rust stains and limescale: potent ones can be used industrial products and small abrasives. Acrylic baths can clean only with specialized acrylic products surfaces, natural acids and weak alkaline solutions.

To protect the enamel bath from the damaging effects of chemical funds and maintain your health (especially if the house is small child), our experts advise cleaning it with the help of folk funds. Not only are they not inferior in effectiveness to industrial ones, but often even surpass them. And sometimes they are the only Acceptable cleaning methods for difficult contamination acrylic surfaces or old bathtubs.

Advice! Limescale and other stains will depart much faster if the bath is steamed before cleaning – dousing its walls with hot shower water.

Method 1. Soda


Soaps and rust deposits are well removed with baking soda. It can also be used to clean acrylics. surfaces, if previously diluted in water to mushy condition (so as not to leave scratches).

Baking soda can be mixed in equal proportions with soda ash, which is sold in household chemical stores – get a more powerful cleaning agent.

Mode of application:

  1. pour both types of soda in a bowl (6 tbsp. l);

  2. dilute with a small amount of water to a paste;

  3. apply a mixture with a sponge to the walls of the bath;

  4. leave it to “work” for 20 minutes;

  5. thoroughly clean contaminated areas with a sponge;

  6. rinse with water.

To work, you must use rubber gloves, as soda ash can cause irritation and dryness skin of hands.

Method 2. Soda and vinegar

To get rid of limescale, one soda is not enough. On a layer of soda applied to the walls of the bath, spray from vinegar spray (you can use an empty bottle from under liquids for windows). After waiting for the reaction to end, accompanied by foam and hissing, we clean the polluted places with a sponge – the plaque easily departs. Finally, you need to wash the bath first warm, then cold water (to give even more shine).

In advanced cases, instead of vinegar, 9% is better to use vinegar essence (75%), diluted in half with water. Minus of this means – a pungent smell and the danger of a chemical burn (use only with gloves).

Method 3. Vinegar and bleach

A powerful tool to remove any deposits from cast iron and steel bath – a mixture of vinegar and bleach (for example, “White” or “Persol”). Effective for surfaces with enamel defects: chips, cracks.

How to use:

  1. in equal proportions mix vinegar 9% and any bleach;

  2. apply the mixture to the contaminated surface;

  3. wait 15 minutes;

  4. sponge;

  5. rinse thoroughly with detergent.

Advantages of the method:

  1. efficiency and availability.


  1. pungent odor;

  2. cannot be used to clean acrylic surfaces.

For especially difficult cases (old stubborn calcareous plaque) we recommend that you first apply soda paste to the dirt on 20 minutes, then, without rinsing, treat the surface with a mixture of vinegar and bleach. After waiting another 20 minutes, clean with a sponge. Even the most the old and dirty bath will shine again with whiteness!

Method 4. Citric Acid

Vinegar and bleach

Citric acid perfectly removes limescale and has whitening properties. It can be used to remove stains. with acrylic surfaces.

Using it is quite simple:

  1. dilute a bag of 10 g of citric acid in 0.5 l of warm water;

  2. using a spray bottle or sponge, apply part of the mixture to contaminated areas or the entire surface of the bath;

  3. wait 15 minutes;

  4. dip the sponge in the rest of the lemon mixture and well rub places affected by limescale.

Another advantage of this tool is the lack of smell. But for hand protection is still recommended to work with citric acid in gloves.

Method 5. Ammonia


Popular among the people as a means to eliminate various spots and deposits of ammonia or ammonia (hydroxide solution ammonium).

White crystalline powder called ammonia (chloride ammonium) used in horticulture to fertilize plants, for removal of lime and rust deposits is not suitable.

We do not recommend cleaning the bath completely with ammonia – sharp an unpleasant odor will spread throughout the apartment and then from it so it will just be rid of. Ammonia can be processed small areas of contamination that cannot be removed by other means. To do this, just apply a little funds and leave for 10 minutes.

Often soda or shabby laundry soap is added to ammonia. This increases its cleansing properties and helps to obtain a paste-like product that is convenient to apply to the bath and clean her.

Method 6. Borax and vinegar

An ancient and proven folk method for removing lime plaque and rust – a mixture of borax (sodium tetraborate) and vinegar. Borax has whitening properties, and vinegar removes calcareous well deposits. Together substances perfectly cope with pollution on any surface of the bath.

A solution of borax in glycerin can be bought at any pharmacy. It used as an antiseptic. Average price – 15 rub for 40 mg.

To prepare a cleaning solution, mix borax and vinegar (or citric acid previously dissolved in water) in proportions 1: 2. The composition can be applied with a sponge only to contaminated places or treat them the entire surface of the bath. 10-15 minutes later rub the yellow coating and rinse with water.

Method 7. Hydrogen peroxide and soda

Hydrogen peroxide has good cleansing and whitening properties, perfectly removes rusty smudges, soapy coating. IN When combined with soda, its properties are enhanced.

To remove yellow marks from the surface of the bath, you need:

  1. mix in a bowl 10 tbsp. l soda and a bottle of 30 mg peroxide hydrogen;

  2. with a rag or sponge apply gruel on the walls of the bath for 20 minutes

  3. rub the contaminated area thoroughly and rinse with water.

The tool can be used locally for particularly dirty places. small size: pour on a dry sponge 2 tbsp. soda and pour peroxide on top, so that the sponge is completely saturated. Put her on contamination for 15-20 minutes, then rub thoroughly problem area – even old rust marks disappear.

Soda with hydrogen peroxide is odorless, does not irritate the skin hand and suitable for cleaning acrylic bathtubs. Extra bonus – bath surface disinfection and education prevention mold.

Method 8. Trisodium Phosphate and Hydrogen Peroxide

Trisodium phosphate is a highly alkaline agent. It is often used in quality detergent in the food industry. Due to its strong whitening properties, it is used in as a bleach for paper.

Trisodium phosphate can be bought at almost any store household chemicals. It breaks down fats well and is therefore excellent. degreasing agent. If you add hydrogen peroxide to it, then it copes with rust marks perfectly.

To obtain a cleaning agent, you must:

  1. dissolve 2 tbsp. sodium salts in a glass of warm water;

  2. add 30 mg of hydrogen peroxide 3%;

  3. apply with a sponge to the surface of the bath and clean;

  4. in case of chronic pollution leave the product for 20 minutes;

  5. After cleaning, rinse the bath thoroughly with water to completely remove traces of detergent.

Using a paste of trisodium phosphate and hydrogen peroxide will succeed easy to get rid of old traces of rust and lime plaque in the seams and joints between the bathroom and the tiles.

Method 9. Oxalic acid

Oxalic acid

An old calcareous or rusty coating will help remove strong the tool is oxalic acid. It is often added to many industrial detergents (called “Antirust”). Many of them contain too concentrated solution, destructive acting on enamel. Clean acrylic surfaces prohibited!

But if you buy oxalic acid (sold in household stores) and breed it yourself in a more gentle enamel proportions, you get an excellent cleaner.

The entire surface of the bath (if this is not necessary) treat with oxalic acid is not necessary. Diluting it in proportion 1: 1 with water, should be applied for 15 minutes only on coated plots. Then rub thoroughly with a sponge and clean surface with a cloth with laundry soap.

Oxalic acid is a combustible substance with increased toxicity. It is dangerous for the skin, eyes, mucous membranes and respiratory organs. When working with it, be sure to use rubber gloves, preferably goggles and a respirator.

Method 10. Toothpaste

Small areas covered with calcareous or rusty deposits wipe off with toothpaste. The advantage of this method is that it is always under by hand.

To clean the dirt is best to use a toothbrush. with a brush:

  1. squeeze out the required amount from the tube;

  2. rub with a brush in a problem place;

  3. wait 5 minutes and rub thoroughly again.

Pasta cannot cope with old-fashioned plaque, but it will refresh well the whiteness of the bath will eliminate simple pollution.

Expert opinion

Cleaning the bathtub from lime and yellow marks will not turn into problem if you regularly clean its surface with Laundry soap and wipe dry. To remove persistent pollution you can use proven folk methods: clean with soda, vinegar, citric acid or a mixture of several chemicals that are at hand for each mistresses.

To get rid of chronic limescale use “heavy artillery” – a mixture of vinegar and bleach, oxalic acid, trisodium phosphate. These funds have an increased hazard class, smell bad, require protection hands and mucous membranes at work, but the final cleaning result is for sure will please.

If you wish, you can achieve a dazzling whiteness of even the most old and old baths – the main thing is to follow the instructions for use cleaning products and be persistent.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment